Seymour Johnson Air Force Base

Sort By

Category

Show Advanced Options

Clear Filters |

4 CMS Propulsion Flight maintains mission readiness

Airman 1st Class Johnathan Jenkins, 4th Component Maintenance Squadron aerospace propulsion apprentice, performs an augmented inspection on an F-15E Strike Eagle at Seymour Johnson Air Force Base, North Carolina, Oct. 28, 2020. Jenkins entered the engine to inspect the flame holder and spray rings for cracks. (U.S. Air Force photo by Airman 1st Class Kimberly Barrera)

Details Download

4 CMS Propulsion Flight maintains mission readiness

Senior Airman Joey Nakamura (left) and Senior Airman Shemar Nelson, 4th Component Maintenance Squadron aerospace propulsion technicians, work on an F-15E Strike Eagle engine at Seymour Johnson Air Force Base, North Carolina, Oct. 28, 2020. The Strike Eagle’s engines incorporate advanced digital technology which allows for aircrew to accelerate from idle power to maximum afterburner in less than four seconds. (U.S. Air Force photo by Airman 1st Class Kimberly Barrera)

Details Download

4 CMS Propulsion Flight maintains mission readiness

Airman Gaven Shanks, 4th Component Maintenance Squadron aerospace propulsion technician (left), and Airman 1st Class Taran Walsh, 4 CMS aerospace propulsion apprentice, work on an F-15E Strike Eagle engine at Seymour Johnson Air Force Base, North Carolina, Oct. 28, 2020. Shanks and Walsh prepared the outer ducts of the engine in order to repair the modular components inside. (U.S. Air Force photo by Airman 1st Class Kimberly Barrera)

Details Download

4 CMS Propulsion Flight maintains mission readiness

Airman 1st Class Jarrett Franklin, 4th Component Maintenance Squadron aerospace propulsion technician, inspects an F-15E Strike Eagle engine for safety discrepancies at Seymour Johnson Air Force Base, North Carolina, Oct. 28, 2020. The typical build cycle for each engine is nine to ten days. (U.S. Air Force photo by Airman 1st Class Kimberly Barrera)

Details Download

4 CMS PMEL Airmen provide calibration support to 103 work centers, all MAJCOMS

Airman 1st Class Manuel Martinez Debray, 4th Component Maintenance Squadron electronics technician, performs an accelerometer calibration at Seymour Johnson Air Force Base, North Carolina, Oct. 19, 2020. An accelerometer is used to measure aircraft and engine vibrations. (U.S. Air Force photo by Airman 1st Class Kimberly Barrera)

Details Download

4 CMS PMEL Airmen provide calibration support to 103 work centers, all MAJCOMS

Staff Sgt. Tucker Rampton, 4th Component Maintenance Squadron electronics supervisor, uses a guidance control section (GCS) test set at Seymour Johnson Air Force Base, North Carolina, Oct. 19, 2020. The GCS test is used to verify characteristics of Aim-9 missiles. (U.S. Air Force photo by Airman 1st Class Kimberly Barrera)

Details Download

4 CMS PMEL Airmen provide calibration support to 103 work centers, all MAJCOMS

Staff Sgt. Tucker Rampton, 4th Component Maintenance Squadron electronics supervisor, uses a guidance control section (GCS) test set at Seymour Johnson Air Force Base, North Carolina, Oct. 19, 2020. The GCS test is used to verify characteristics of Aim-9 missiles. (U.S. Air Force photo by Airman 1st Class Kimberly Barrera)

Details Download

4 CMS PMEL Airmen provide calibration support to 103 work centers, all MAJCOMS

Staff Sgt. Jacob Felton, 4th Component Maintenance Squadron physical dimensional supervisor, uses a tension force gauge to tests a strain gauge at Seymour Johnson Air Force Base, North Carolina, Oct. 19, 2020. The strain gauge is used to test the amount of force placed upon aircraft tubing during bending. (U.S. Air Force photo by Airman 1st Class Kimberly Barrera)

Details Download

4 CMS PMEL Airmen provide calibration support to 103 work centers, all MAJCOMS

Airman 1st Class Nikki Silvestri, 4th Component Maintenance Squadron physical dimensional technician, calibrates a digital torque wrench using a CDI multi torque station at Seymour Johnson Air Force Base, North Carolina, Oct. 19, 2020. The Precision Measurement Equipment Laboratory shop calibrates 2,700 torque wrenches a year. (U.S. Air Force photo by Airman 1st Class Kimberly Barrera)

Details Download

4 CMS PMEL Airmen provide calibration support to 103 work centers, all MAJCOMS

Tech. Sgt. KC Berger, 4th Component Maintenance Squadron physical dimensional element Non-commissioned Officer in Charge (right), trains the use of primary pneumatic pressure standard use to Senior Airman Thiago Santos, 4 CMS electronics technician (left), at Seymour Johnson Air Force Base, North Carolina, Oct. 19, 2020. Berger explained the standard is used to calibrate all of the laboratory working standards which the calibrates all of the customer pressure gauges and test measurement and diagnostic equipment for the base and supported units outside of SJAFB. (U.S. Air Force photo by Airman 1st Class Kimberly Barrera)

Details Download

201021-F-YG657-1317

Airman 1st Class Ernesto Horan, 4th Component Maintenance Squadron avionics technician apprentice, repairs a multipurpose display at Seymour Johnson Air Force Base, North Carolina, Oct. 21, 2020. Avionics encompasses the development and use of electrical equipment and electronic devices in aviation. (U.S. Air Force photo by Senior Airman Jacob Derry)

Details Download

201021-F-YG657-1247

Airman 1st Class Ernesto Horan, 4th Component Maintenance Squadron avionics technician apprentice, rebuilds a multipurpose display at Seymour Johnson Air Force Base, North Carolina, Oct. 21, 2020. Avionics technicians ensure every component of the F-15E Strike Eagle is working properly and all safety measures are met. (U.S. Air Force photo by Senior Airman Jacob Derry)

Details Download

201021-F-YG657-1229

Airman 1st Class Ernesto Horan, 4th Component Maintenance Squadron avionics technician apprentice, repairs a multipurpose display at Seymour Johnson Air Force Base, North Carolina, Oct. 21, 2020. Avionics technicians ensure every component of the F-15E Strike Eagle is working properly and all safety measures are met. (U.S. Air Force photo by Senior Airman Jacob Derry)

Details Download

201021-F-YG657-1019

Airman 1st Class Ernesto Horan, 4th Component Maintenance Squadron avionics technician apprentice, inspects a multipurpose display at Seymour Johnson Air Force Base, North Carolina, Oct. 21, 2020. Avionics technicians are responsible for upkeep of the electronic systems of the F-15E Strike Eagle. (U.S. Air Force photo by Senior Airman Jacob Derry)

Details Download

201016-F-YG657-1351

Senior Airman Alan Alvarez, 334th Aircraft Maintenance Unit weapons load crew member, raises a Guided Bomb Unit-21 to an F-15E Strike Eagle during a quarterly load crew competition at Seymour Johnson Air Force Base, North Carolina, Oct. 16, 2020. The purpose of the load crew competition is to showcase weapons crews highly developed skills with precise loading capabilities. (U.S. Air Force photo by Senior Airman Jacob Derry)

Details Download

201016-F-YG657-1306

Senior Airman Alan Alvarez, 334th Aircraft Maintenance Unit weapons load crew member, prepares to attach a Guided Bomb Unit-31 to an F-15E Strike Eagle during a quarterly load crew competition at Seymour Johnson Air Force Base, North Carolina, Oct. 16, 2020. For air-to-ground missions, the F-15E can carry most weapons in the Air Force inventory. (U.S. Air Force photo by Senior Airman Jacob Derry)

Details Download

201016-F-YG657-1281

Staff Sgt. Nicholas Cunningham (left), and Senior Airman Alan Alvarez (right), 334th Aircraft Maintenance Unit weapons load crew members, prepare to raise a Guided Bomb Unit-31 during a quarterly load crew competition at Seymour Johnson Air Force Base, North Carolina, Oct. 16, 2020. Once released, the fins of the GBU-31 guide the bomb as far as 15 miles to the designated target coordinates. (U.S. Air Force photo by Senior Airman Jacob Derry)

Details Download

201016-F-YG657-1130

Senior Airman Henessi Mata, 4th Munitions Squadron munitions training technician, inspects a Guided Bomb Unit-12 during a quarterly load crew competition at Seymour Johnson Air Force Base, North Carolina, Oct. 16, 2020. The purpose of the load crew competition is to showcase the weapons crews’ highly developed skills with precise loading capabilities. (U.S. Air Force photo by Senior Airman Jacob Derry)

Details Download

201016-F-YG657-1086

Staff Sgt. Patrick Rivers, 4th Munitions Squadron munitions controller, inspects a Guided Bomb Unit-12 during a quarterly load crew competition at Seymour Johnson Air Force Base, North Carolina, Oct. 16, 2020. The purpose of the load crew competition is to showcase the weapons crews’ highly developed skills with precise loading capabilities. (U.S. Air Force photo by Senior Airman Jacob Derry)

Details Download

201016-F-YG657-1079

Airmen assigned to the 4th Munitions Squadron prepare weapons during a quarterly load crew competition at Seymour Johnson Air Force Base, North Carolina, Oct. 16, 2020. Teams prepared a Guided Bomb Unit-31 and GBU-12 for load crew teams to equip to an F-15E Strike Eagle. (U.S. Air Force photo by Senior Airman Jacob Derry)

Details Download